Shine Decor 3D Bendable Neon Flex: Installation & Care Guide

Table of Contents

1. Why Choose 3D NEON Flex?
2. Key Specifications
3. Safety & Warranty
4. Installation Guide
   • Cutting & Customizing
   • Waterproofing for Outdoor Use
5. Troubleshooting
6. Customer Support

1. Why Choose 3D NEON Flex?

Shine Decor’s 3D NEON Flex redefines flexibility and durability in LED lighting. Perfect for creative installations, it offers:

• 360° Bendable Design: Shape into curves, angles, or 3D forms effortlessly.
• IP65 Water-Resistant: Withstands splashes and light moisture (not submersible).
• Easy Customization: Cut every 10cm (3.9 inches) for tailored lengths.
• Vibrant Illumination: High-density LEDs for seamless, bright lighting.

 

2. Key Specifications

• Voltage: AC120V
• Power Consumption: 10W per meter
• LED Type: SMD2835
• Led density: 120LEDs/M
• Max Run Length: 25 meters (82 feet)
• Cutting Interval: Every 10cm (3.9 in)
• Applications: Indoor/outdoor decor, signage, artistic displays

 

Included Accessories:

• Aluminum mounting clips
• Power cord with fast connector
• End caps, heat shrink tubing

3. Safety & Warranty

⚠️ Critical Warnings:

• Do not bend at sharp angles—maintain smooth curves to avoid wire damage.
• Unroll fully before use—coiled lights may overheat.
• Avoid heavy rain/submersion—use waterproofing kits for outdoor durability.

🔧 Warranty:

• 1-Year Coverage: Defects in materials/workmanship.
• 1-Month Full Refund: Hassle-free returns.

4. Installation Guide

Cutting & Customizing NEON Flex

1. Turn off the power.
2. Cut only at 10cm(3.94 inches) marks (marked with black indicators).
3. Seal ends with waterproof end caps.
4. Test lights before final installation.

Note:

• Cutting voids certifications. Use sharp tools for clean cuts.
• Also, cut on the unit allowing for customization to fit your specific needs. Cut the black line to your need length(not recommended to cut to become multi-roll neon or re-connect multi-roll neon again.

Waterproofing for Outdoor Use

1. Apply silicone adhesive to exposed connections.
2. Cover joints with heat shrink tubing and seal with a heat gun.
3. Let the adhesive cure for 24 hours for maximum protection.

Pro Tip: Use Shine Decor’s waterproofing toolkit for enhanced durability.

5. Troubleshooting

Issue	Solution
Lights Not Turning On	Verify 120V outlet and secure connections.
Partial Dimming	Check for loose pins or damaged wires.
Water Damage	Reapply silicone sealant to joints.
Bending Failures	Avoid sharp angles; use gradual curves.

6. Customer Support

For assistance or bulk orders:

• Website: www.shine-decor.com
• Email: info@shine-decor.com