Can 120v led strip lights be cut?
120v led strip lights
Yes, 120V LED strip lights can generally be cut. But there are important things to keep in mind to do it safely and effectively:
1. Check the Manufacturer’s Instructions:
- Cutting points: Most 120V LED strips have designated cutting points marked along the strip. A small line or scissor symbol on the strip typically indicates these. Cutting anywhere other than these marked points could damage the strip or cause it to stop working. Different led strips have different cut unit, please check carefully when you buy led strips.
- Do not cut the power cord: If your LED strip has a built-in plug, don’t cut the cord itself, as it will likely ruin the connection.
2. Tools You Need:
- Use sharp scissors or a utility knife to make a clean cut at the designated points.
- Avoid cutting the copper pads or wires; only cut through the sections marked for cutting.
3. After Cutting – Reconnecting the Strips:
- Once you cut the strip, the end that’s left needs to be connected to a power source or a compatible connector.
- You may need to solder the wires to the cut ends, or use specialized connectors to reattach the power supply or make extensions.
4. Safety Considerations:
- Ensure you’re using an appropriate power supply for the length of the LED strip you’re working with after cutting. as cutting reduces the load the strip draws, which may affect the power supply’s performance.
- Always turn off the power before making cuts or adjustments.
5. Alternative:
If you're not good at cutting and reattaching, you could opt for pre-cut strips or connector kits that allow for easier extension or modification.
Shine Decor 120V led strip lights can be cut please check products and have match connector kits to offer. Please check here: https://www.shine-decor.com/collections/120v-led-strip-lights
